Are you selling used plating or metal finishing equipment? Click Here to contact us about your free listing!
Category:
A warehouse with metal poles and red posts.
A large metal box sitting in the middle of a room.
A red pole in an industrial setting with metal walls.
A ladder is in the middle of an empty room.
A large metal container with some stuff inside of it
A crane is lifting a beam into the ceiling.
A red pole in the middle of an industrial building.
A room with many large metal tanks and some red pipes.
A car is parked in the middle of an industrial building.
A rusted metal box sitting in the middle of a room.

Manual Nickel Line

Manual Nickel Line

Each station is 84” x 30” x 54”deep.  Three of the tanks are 36” wide.  The nickel tank and one of the extra tanks are rubber-lined.  The tank linings appear to be in good condition, as do the tank integrities.

Includes Jessup twin hook hoist (best guess on hoist capacity is 3-ton), new hoist superstructure and festooning cable system. The superstructure and track were built with new steel beams, but the line was never put into operation.  OAD is about 40’L x 9’W x 12’H with the hoist.

All that is needed to complete the line are anode baskets, nickel solution, catwalk, bus bar and rectifiers.

Process sequence:

  • Tank 1: Three-station cleaner tank (two soak cleaners and one electro cleaner.  Counterflow rinse.  No bussing.) 84” x 90” x 54”deep
  • Tank 2: Single-station rinse 84” x 30” x 54”deep
  • Tank 3: Two-station acid 84” x 60” x 54”deep
  • Tank 4: One station acid rinse 84” x 36” x 54”deep
  • Tank 5: Five-station nickel plating tank. 12′ 6″ long.  Includes air agitation piping. 84” x 150” x 54”deep
  • Tank 6: One-station rinse tank, lined, 84” x 36” x 54”deep, includes external overflow weir.
  • Tank 7: Single-station extra tank 84” x 30” x 54”deep
  • Tank 8: Single-station extra tank. lined, 84” x 36” x 54”deep, no overflow weir ***SOLD*** 

Location: IL

Please contact us for pricing.

To receive more information on this equipment, please fill out the following form and click the 'Submit' button.

    All equipment transactions must be PAID IN FULL before loading on truck. Used equipment is sold "as-is, where-is". Since we do not offer guarantees or warranties, we encourage our customers to visit the location and inspect machinery before purchase. Buyer is responsible for loading and freight charges (if applicable) unless otherwise noted. Howard Supply is not liable for freight damaged in transit.

    Howard Supply is an excellent source for plating and metal finishing equipment, both new and used.

    Are you selling used plating or metal finishing equipment? Click Here to contact us about your free listing!

    New Listings
    Browse Equipment List